Support / My Tapo camera plays in the Tapo app, but its password does not work in ViewTile.
Tapo RTSP and ONVIF: camera account, URLs and ports
Last updated:
In short
Tapo RTSP uses /stream1 or /stream2 on port 554, while ONVIF uses port 2020 and a separate camera account. These services are available only on certain models and configurations, according to TP-Link’s documentation (read 16 November 2026). ViewTile has not been tested with Tapo cameras.
Create the camera account
The camera account is separate from your Tapo cloud login. Entering your cloud email address and password in ViewTile is not the documented way to authenticate to the camera.
Follow TP-Link’s camera account instructions:
- Open the camera’s Live View in the Tapo app.
- Tap the gear icon to open Device Settings.
- Open Advanced Settings > Camera Account.
- Select Understand and Agree to Use, then create the camera username and password.
The username and password must each contain 6 to 32 characters. The camera password must differ from your Tapo account password. Keep these credentials available for ViewTile’s separate username and password fields.
This setup happens on the camera through the Tapo app. ViewTile cannot create or enable the camera account for you.
The Tapo RTSP URL
Replace CAMERA_IP with the camera’s local address. Leave the username and password out of the link you paste into ViewTile.
| Picture | Stream address |
|---|---|
| High quality | rtsp://CAMERA_IP:554/stream1 |
| Standard quality | rtsp://CAMERA_IP:554/stream2 |
| Telephoto high quality on documented dual-lens models | rtsp://CAMERA_IP:554/stream6 |
| Telephoto standard quality on documented dual-lens models | rtsp://CAMERA_IP:554/stream7 |
TP-Link documents port 554 for RTSP. The explicit port in these examples avoids leaving that choice to the client.
For dual-lens models such as C246D and C840, TP-Link documents stream6 and stream7 for the telephoto lens. Its ONVIF interface exposes only the wide lens. Choosing a different ONVIF profile in ViewTile cannot expose a lens that the camera does not offer through ONVIF.
ONVIF port 2020 and Profile S
TP-Link specifies ONVIF service port 2020 and Profile S. Its documented ONVIF offering does not include two-way audio.
In ViewTile, use port 2020 in Camera address. Use port 554 in an RTSP link under Stream address. These ports serve different purposes: passing the ONVIF connection test does not mean that the video connection on 554 can get through.
Which cameras do not offer these services
Read the model restrictions in Tapo’s RTSP and ONVIF FAQ before troubleshooting an address.
Battery cameras and doorbells generally do not offer RTSP or ONVIF. TP-Link lists an RTSP exception for D235, D225 and TD25 when hardwired with the jumper cable and configured for always-on mode. That RTSP exception does not mean ONVIF availability.
The FAQ explicitly says C410, C420, C425 and D230 do not offer RTSP streaming. A different path or password will not enable it.
Hub-connected cameras have no IP address of their own. Do not assume that entering the hub’s address provides an RTSP stream for every attached camera. Check the documented capabilities of the particular camera and hub arrangement first.
Tapo Care and SD recording can disable ONVIF
The same FAQ says only two of these three options can run at once: Tapo Care, SD card recording, and NVR/NAS/ONVIF software.
With Tapo Care and SD recording both in use, ONVIF is disabled until the card is removed, according to the FAQ. Decide which recording arrangement you need before changing it. Repeated scans or password changes in ViewTile cannot resolve this camera-side restriction.
Check the connection limit
A TP-Link staff explanation describes two main-stream connections and two substream connections. Tapo Care uses one main-stream slot, and viewing in the Tapo app uses one too.
If another main-stream connection cannot start, close an unused live view or try stream2. The staff guidance also suggests restarting the camera or changing the camera account to clear connections. Changing the account means updating its credentials wherever you use them.
A connection limit is one possible cause of missing video. It is not a reason to change a working password before checking which streams are already open.
Add it in ViewTile
- Put your phone and camera on the same local network.
- From the empty camera wall, tap Add a camera, then Find cameras.
- If the scan finds nothing, try Search deeper, then Type the camera address instead if necessary. The scan does not directly probe port 2020, so a missing result does not mean that ONVIF is unavailable.
- Select Camera address, enter the camera IP and port 2020, and use the separate camera account credentials.
- Run the connection test and read the first failed step.
- For direct RTSP, choose Stream address, paste the appropriate URL and enter credentials in their own fields.
Stream-address cameras provide video only: no pan and tilt, picture settings, clock check, recordings or diagnostics beyond playback.
When it fails
Host unreachable means ViewTile has no route to the camera. Check the IP, power and network. Guest Wi-Fi, separate VLANs and router client isolation can prevent communication. These fixes belong on the network or camera. On iPhone, also check Settings > Privacy & Security > Local Network.
Port closed means the camera answered but nothing listened on that port. Check that you entered 2020 for ONVIF. Revisit the model restrictions and the Tapo Care plus SD recording combination.
Not an ONVIF device means an HTTP service answered without an ONVIF response. Confirm the address and ONVIF port instead of assuming that any responding service is the right one.
Credentials needed or Wrong username or password points back to the camera account. Confirm that it is enabled and that you did not enter the cloud login. TP-Link also recommends changing special characters in that account when troubleshooting authentication.
No video from this camera means no video arrived after three attempts over TCP and then UDP. Check port 554, the stream path, camera credentials and available connection slots. A router rule can block video even when ONVIF on 2020 answers.
Stream keeps dropping means video started but three reconnects failed. For an ONVIF camera, open Diagnostics. If the camera still answers, try the substream or reduce its bitrate where available; otherwise, investigate the network. The failure reason also appears under Recent events.
Find the IP address
TP-Link’s IP address guide gives this Tapo app route: Home > camera card > Live View > gear > Device Settings > Device Info. You can also check your router’s DHCP client list.
Related articles
See Adding a camera by its stream address, iPhone local network permission, IP camera found but no picture and Stream keeps dropping.

